- CNC & laser Cut
- Custom Vector
- Free designs
- Custom Digitizing
- Custom SVG
- CNC & laser Cut
- Custom Vector
- Free designs
- Custom Digitizing
- Custom SVG
- CNC & laser Cut
- Custom Vector
- Free designs
- Custom Digitizing
- Custom SVG

Vector, SVG and PNG • November 17, 2026 • 8 min read
Vector File Formats: AI, EPS, SVG, and PDF
Curves, not a grid of pixels
Vector file formats store curves, not a grid of pixels. AI, EPS, SVG, and PDF can all hold those curves. They are not interchangeable, and a PDF or an SVG can also hide a raster inside a vector wrapper. This is how to tell them apart and which one to hand a printer, a cutter, or a digitizer.
A full-color vector redraw starts at $25. A single-color SVG starts at $15. Complex artwork starts at $35. Simple files are often ready in 6–12 hours. Standard redraws are 12–24 hours. Rush is +$5.
Published November 17, 2026 • 8 min read • Vector, SVG and PNG

AI, EPS, SVG, and PDF
AI is the Adobe Illustrator master. It keeps layers, live type, and the edits we made. It is the file we keep when the same logo has to come back next season in a new size. A printer who works in Illustrator can take it directly.
EPS is an older exchange format. It still opens in Illustrator, Corel, and a lot of RIP software. It is a poor place to keep live type, and some newer effects do not survive the save. We send EPS when a vendor asks for it, from the AI master, not instead of the master.
SVG is the file a cutter and a browser both understand. Cricut, Silhouette, and most laser software want SVG. A single-color SVG is the usual cut file: one compound path, no hidden bitmaps, text converted to curves. A full-color SVG can be a print file. It is not automatically a cut file.
PDF can be a vector, a raster, or both. A print shop often asks for PDF because their RIP takes it. A PDF exported from a photo is still a photo. Open it and check whether the logo is paths. If you can select a letter as a curve, it is vector. If the whole page is one image, it is not.
DXF shows up when a CNC or a sign shop asks for it. It is a path format, not a print format. Strokes, fonts, and colors are often dropped. We send DXF from the closed paths, after type is outlined, and we still send the SVG or AI so the shop can see the art. A DXF alone is a poor master.
Fonts are the quiet failure. An AI file with live type looks correct on our machine and substitutes a different font on yours. For a handoff, type is converted to curves. For a file you will edit later, we can leave the type live and name the font. Say which one you need. A cutter cannot use live type either way.
Raster versus vector
A raster is pixels: JPG, PNG, a screenshot, a photo of a truck door. Scale it up and the edges break. Tracing it automatically often leaves hundreds of points and a bumpy curve. A hand redraw replaces those pixels with the fewest curves that still match the mark.
You can put a PNG inside an AI, an EPS, an SVG, or a PDF. The wrapper does not make it a vector. If the file size jumps when you zoom, or if the edges blur, you are still looking at pixels. We redraw that art. We do not rename it.
For embroidery, the vector is the clean master we digitize from. The machine still needs DST, PES, EXP, JEF, or VP3. A perfect SVG will not sew. It gives the digitizer a sharp edge to follow, which a blurry PNG does not.

What we send back
The master is an AI file with type outlined unless you asked to keep the font live. From that master we export the formats the job needs: EPS or PDF for print, SVG for a cutter, DXF when a CNC shop named it. You do not get a different drawing in each format. You get the same curves saved the way each program expects.
A single-color SVG starts at $15. A full-color redraw starts at $25. Complex artwork starts at $35. Simple files are often ready in 6–12 hours. A redraw with many small pieces, or a photo that has to be interpreted, can take 24–48 hours. Rush is +$5. The format list does not add a second price on top of the redraw.
Check the file before you send it to a printer or a cutter. Zoom in. If the edge stays sharp, it is a curve. If it breaks into blocks, a raster is still inside the file and we need to redraw that part. Select the type. If it is still editable text, it was left live on purpose. If the shop does not have the font, ask us to outline it before you send the file on.
A rejected file should come back with the program name and the error. We fix the export. We do not start a new drawing unless the art itself was wrong. That distinction is why the master stays in AI and the handoff files are exports.
Which file for print, cutting, and embroidery
Print, including DTF and screen print, wants the vector master: AI, and a PDF or EPS if the shop named one. Type should be outlined when the shop does not have the font. Colors should be named, spot or process, so the print does not guess.
Cutting wants SVG, usually one color, with closed paths. Open lines and a stroke that was never expanded will not cut as a shape. Silhouette and Cricut both choke on a file that still has live text or a linked photo.
Embroidery prep wants the same clean vector, then a separate stitch file. Send the vector with the garment and the size. Left chest is typically 3 to 4 inches. A hat is smaller. The vector page is the redraw. The left chest and hat pages are the stitch files.
CNC and laser software often takes SVG or DXF. A decorative SVG with strokes and overlaps is not a cut path. The CNC page is where those paths are closed and ordered. Do not hand a print PDF to a laser and expect a clean cut.
A single-color SVG for a cutter should be one compound path. Overlapping shapes that are not united will cut twice and lift the material. Hairlines and open paths are ignored or cut as a line through the sheet. We expand strokes and close paths before that file goes out. A full-color SVG for print can keep separate filled shapes. Using the print SVG on a cutter is the usual reason a decal comes apart.
Embroidery does not sew the SVG. The vector is the clean edge the digitizer follows, then the machine file is DST, PES, EXP, JEF, or VP3. If you only have a JPG, the vector redraw is the first job and the stitch file is the second. They are priced apart: single-color SVG from $15, full-color vector from $25, left chest and hat stitch files from $10.
If a vendor rejects the file, ask which program opened it and what the error said. “Not a vector” usually means a placed image. “Font missing” means type was not outlined. “Paths not closed” means a cut file was exported from a print file. Those three are different fixes, and sending the same PDF again does not change which one it is.
Color is the other handoff. Print often wants spot colors or a named palette. A cutter ignores color and reads shapes. An embroidery file uses thread colors, which are not the same as the print swatches. We can match a thread color to a print color in the note. We do not pretend a PDF swatch is a stitch.
Keep the AI master. The SVG, EPS, PDF, and DXF are exports. If a size or a color changes next season, the edit happens in the master and the exports are made again. Editing the SVG and the PDF separately is how the cutter file and the print file drift apart.
Before a cutter run, open the SVG and look for stray points and open ends. A path that does not close will either be ignored or cut as a line through the material. Delete the guide lines that were only there for layout. A print PDF can keep a crop mark. A cut file should not. If the software shows a stroke instead of a fill, the stroke was not expanded and the machine will cut the center of the line, not the shape you see.
Before a print run, open the PDF and confirm the logo is still curves at 400 percent. A file that looks sharp at screen size and breaks into pixels at a large zoom still has a raster inside it. That is a redraw, not an export setting. Send the file back with a screenshot of the zoom. We replace the pixels in the master and export again. We do not raise the resolution of a photo and call it a vector.

Key points
- ✓ AI is the master. EPS, SVG, PDF, and DXF are exports of that master.
- ✓ A PDF or an SVG can still be a photo wrapped in a vector file.
- ✓ Cutters want a single-color SVG with closed paths. Printers want the outlined vector.
- ✓ A single-color SVG starts at $15. A full-color redraw starts at $25.
Quick checks before you send the file
- ✓ Zoom to 400 percent. If the edge breaks into blocks, it is still a raster.
- ✓ Select the type. If the shop does not have the font, ask for it to be outlined.
- ✓ Do not hand a print PDF to a laser and expect a closed cut path.
Frequently Asked Questions
Keep one master
Edit the AI file, then export again. Editing the SVG and the PDF separately is how the cutter file and the print file drift apart.
Send whatever art you have
A blurry PNG is enough to quote. A full-color redraw starts at $25, and a single-color SVG starts at $15.
Copyright © 2026 Las Vegas Designs USA. All rights reserved.
